BS EN 1429-2009 沥青和沥青粘合剂.沥青乳液的筛余物和筛分存储稳定性的测定

作者:标准资料网时间:2024-05-12 10:40:14 浏览:8244 来源:标准资料网

【英文标准名称】:Bitumenandbituminousbinders-Determinationofresidueonsievingofbituminousemulsions,anddeterminationofstoragestabilitybysieving
【原文标准名称】:沥青和沥青粘合剂.沥青乳液的筛余物和筛分存储稳定性的测定
【标准号】:BSEN1429-2009
【标准状态】:现行
【国别】:英国
【发布日期】:2009-04-30
【实施或试行日期】:2009-04-30
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:Bindingagents;Bitumenemulsions;Bitumens;Bituminous;Checkingequipment;Construction;Definitions;Determination;Emulsions;Laboratorytesting;Laboratorytests;Materialstesting;Mathematicalcalculations;Petroleumproducts;Residuetests;Screening(sizing);Shelflife;Sieveresidues;Testreports;Testing
【摘要】:ThisEuropeanStandardspecifiesmethodsutilizingsievingforthedeterminationofthequantityofcoarseparticlesofbinderpresentinbitumenemulsions,andforthedeterminationofstoragestability.
【中国标准分类号】:E43
【国际标准分类号】:75_140;91_100_50
【页数】:14P.;A4
【正文语种】:英语

下载地址: 点击此处下载

返回跳至顶部

上一篇: BS EN 12850-2009 沥青和沥青粘合剂.沥青乳化液pH值的测定
下一篇: BS EN 13303-2009 沥青及沥青粘合剂.工业沥青受热质量损失的测定

【英文标准名称】:MaterialNumbers;SystemofthePrincipalGroups2and3:Non-ferrousMetals
【原文标准名称】:材料编号.2组和3组的分类.有色金属
【标准号】:DIN17007-4-1963
【标准状态】:作废
【国别】:德国
【发布日期】:1963-07
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:有色金属;镉;镁;铜合金;材料;锌;锡;镍;合金;金属;锡合金;铅合金;材料编号;铜;铅;镁合金
【英文主题词】:magnesiumalloys;tinalloys;leadalloys;copperalloys;tin;cadmium;lead;copper;nickel;metals;zinc;materials;alloys;non-ferrousmetals;magnesium;materialnumbers
【摘要】:Werkstoffnummern;Catalogueofprincipalgroups2and3:Non-ferrousmetalsIndexnumériquedesmatières;Groupes2et3:métauxnonferreux
【中国标准分类号】:H60
【国际标准分类号】:03_100_10;77_120_00
【页数】:4P.;A4
【正文语种】:德语

Product Code:SAE J1199
Title:Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners
Issuing Committee:Fasteners Committee
Scope:This SAE Standard covers the mechanical and material requirements for eight property classes of steel, externally threaded metric fasteners in sizes M1.6 through M36, inclusive, and suitable for use in automotive and related applications.Products included are bolts, screws, studs, U-bolts, preassembled screw and washer assemblies (sems), and products manufactured the same as sems except without washer.Products not covered are tapping screws, thread-rolling screws, and self-drilling screws. Mechanical and material requirements for these products are covered in other SAE documents.The term stud as referred to herein, applies to a cylindrical rod of moderate length, threaded on either one or both ends or throughout its entire length. It does not apply to headed, collared, or similar products which are more closely characterized by requirements shown herein for bolts.For specification purposes, this document treats U-bolts as studs. Thus, wherever the word studs appears, U-bolts is also implied. U-bolts covered by this document are those used primarily in the suspension and related areas of vehicles. (Designers should recognize that the U configuration may not sustain a load equivalent to two bolts or studs of the same size and grade; thus actual load-carrying capacity of U-bolts should be determined by saddle load tests.)