DIN 14683-1972 带有固定插塞及伸长套管的三角架

上一篇: BS 4857-1-1972 空气分配系统终端再热装置试验与评定方法.第1部分:热性能及空气动力特性
下一篇: DIN 3267-1972 水箱冲泄阀用冲洗管

Product Code:SAE J1574/2
Title:Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale
Issuing Committee:Vehicle Dynamics Standards Committee
Scope:This SAE Information Report presents the background and rationale for SAE J1574-1.The motor vehicle industry is working toward a more complete understanding of the factors affecting the motions of vehicles on the roadway, by using a variety of techniques that predict responses to road and operator inputs. The capability to predict responses is desirable so that vehicles can be designed for optimum safety and utility. In addition to the force and moment properties of the pneumatic tires, a number of vehicle and suspension parameters affect the response of the vehicle; these include weight, center-of-gravity location, moments of inertia, suspension ride and roll rates, suspension kinematic and compliance properties, and shock absorber characteristics. These parameters must be quantified in order to predict vehicle responses.Measurement of most of these parameters will be limited to determining their values in the linear range for use in directional control simulations. The limitation to linear range characteristics primarily reflects current measurement practice, to which SAE J1574-1 is directed. In the case of mass and inertia properties, this limitation clearly does not apply. For those to which it does apply, it is not felt to be a serious limitation since most of the measurement techniques can be extended beyond the linear range through appropriate increases in steering or suspension displacement or loading. Use of the measured parameters in simulations is assumed as the most frequent use. However, this does not seem to limit their use to simulations. Vehicle and suspension characteristics appropriate for simulation can equally well be used for vehicle and suspension characterization and comparison, suspension development and optimization, and processing of road test data.As noted in SAE J1574-1, vehicles addressed will be limited to passenger cars, light trucks, and on-highway recreational and commercial vehicles with two or more axles of approximately the same wheel track. This excludes bicycles, motorcycles, tricycles, and vehicles intended primarily for off-highway use. This limitation is largely a recognition of the types of vehicles historically measured for ride and directional control simulation, since SAE J1574-1 has been written to document the current state-of-the-art rather than to expand it. Additionally, inclusion of these other vehicles might well require measurement of other chassis characteristics to properly simulate their dynamic characteristics. The measurement of these additional characteristics may not be supported by widespread experimental practice.【英文标准名称】:Mineralandsapphirewatch-glasses-Part2:assemblytothecasebyadhesiveorusingagasket.
【原文标准名称】:无机和蓝宝石手表玻璃.第2部分:使用粘合剂或衬垫组装外壳
【标准号】:NFS86-400-2-2008
【标准状态】:现行
【国别】:法国
【发布日期】:2008-06-01
【实施或试行日期】:2008-06-21
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:外壳;衬垫;时计学;无机玻璃;蓝宝石;符号;时间测量装置;表壳;表;手表面玻璃
【英文主题词】:Enclosures;Gaskets;Horology;Mineralglasses;Sapphires;Symbols;Timemeasuringdevice;Watch-cases;Watches;Watch-glasses
【摘要】:
【中国标准分类号】:Y11
【国际标准分类号】:39_040_10
【页数】:9P.;A4
【正文语种】:其他